If your TCL TV screen goes black but sound still works fine, you must read this post so that you will never regret it later.
In this post, you will know the reasons behind the “TCL TV screen goes black but sound still works” issue, and at the same time, you will learn how to resolve the problem on your own. If this sounds convincing, let’s dive in.
The Quick Solution: TCL TV Screen Goes Black But Sound Still Works
One quick thing you can do about the “TCL TV Black Screen” or TCL TV Screen Goes Black But Sound Still Works issue is to Power Cycle your TV. The method is very effective if the problem is because of a glitch. In case you don’t know how to power cycle your TV, here are the steps you need to follow:
- Power off your TCL TV
- Unplug the TV from the power outlet
- Wait a minute or two
- Plug the TV back into the power outlet
- Power on your TV, and see if the problem is resolved
Note – I have come across a few users who reported that a simple act of power cycling their TCL TV helped them get back their TV to normal mode, and here is the reference.
- Power Cycle Your TV
- Change The Power Outlet.
- Check Cable Connections
- Disable Or Enable Fast Start Option
- Update TV Firmware
- Factory Reset Your TV
- What Causes A TCL TV Screen To Go Black?
- Wrapping Up: TCL TV Screen Goes Black But Sound Still Works
Power Cycle Your TV
One good place to start is to power cycle your TV. It will fix any TV glitch in case a glitch in the TV has caused the issue. To power cycle your TV, you must power off it and unplug it from the power outlet. Next, you can wait a minute and plug it into the power outlet. After that, you can power it on and see if the issue is resolved.
Change The Power Outlet.
Sometimes the TCL Roku TV screen goes black but sound still works may be because of an improper power supply behind it. For example, the power outlet may be damaged and not transmit power properly to the device. Hence, you can try plugging your TV into a different power outlet and see if that resolves the issue.
Check Cable Connections
Another critical thing to do in this regard is to check cable connections. You must carefully check the cable connections and see if there is any loose or damaged cable. If an HDMI cable is loose or damaged, it can cause issues with audio or video. You must ensure that wires are correctly connected, and if you find any damaged cable, you must replace it immediately.
Disable Or Enable Fast Start Option
Tweaking the Fast Start Option has worked for many TCL users experiencing my TCL TV screen is black and helped them break out of the issue. Hence, it would be best if you tried it too. You can do this by hitting the Home button on your remote and getting to Settings. After that, you must select System and choose Fast TV Start. Next, you need to disable the option if it’s already enabled and enable it if it’s disabled by default.
Update TV Firmware
A TCL TV running on outdated TV Firmware is vulnerable to many issues. You must understand that an obsolete TV Firmware can have many bugs, which is why updates are released. You must always keep your TV Firmware up to date with the latest updates.
If you have been missing the updates, it’s not a wise thing for sure. Hence, you need to update your TV Firmware immediately. For now, you can do it manually, and later you can enable auto-update to keep the process seamless.
To update the TV Firmware manually, here is what you must do:
- Hit the Home button on your remote
- Navigate to Settings and click OK
- Scroll and select More Settings
- Choose Device Preferences and About
- Select System Update and Network Update
- The TV will look for available updates
- After it finds one, you can confirm by clicking OK
- The TV will automatically restart
Factory Reset Your TV
If the TCL TV screen goes black but sound still works issue persists despite updating your TV Firmware, consider performing a factory reset. A factory reset should delete all files and incorrect settings. It will get everything back to its default value, which may fix the issue for you. To perform a factory reset, you need to do the following:
- Hit the Home button on the remote
- Go to Settings, and select System
- Select Advanced System Settings and Factory Reset
- Select Factory reset everything
- Enter the code displayed on the screen, and hit OK
In case your TCL TV Black Screen Blinking Light here is How To Solve The Issue.
“My TCL Roku TV Screen Is Black But Has Sound” – Hardware Problems.
I have discussed as many as six proven methods to fix the “TCL Roku TV screen goes black but sound still works” issue. However, if none of these methods work for you, it may indicate a hardware problem, such as faulty LED lighting or a defective screen. In that case, it’s always recommended that you consult a TV mechanic or take your TV to the nearest service center.
Most importantly, you must avoid messing with hardware issues since it requires excellent technical expertise. If you try messing with TV hardware with your limited knowledge, you may cause more damage than good.
What Causes A TCL TV Screen To Go Black?
Seeing the TCL TV screen goes black, but the sound still works is not a pleasant experience for sure. However, the issue can be resolved by following the proven methods that have worked well for other TCL users. Before familiarizing you with the techniques, it’s essential to make you aware of what causes a TCL TV screen to go black.
Based on the reports of various TCL TV users who have lately experienced the same issue and had the issue resolved, I can say that the TCL TV screen goes black but sound still works issue has different reasons for different users. Many users reported that the problem was caused due to a glitch in the System, which was eventually fixed as they power-cycled their TVs.
In the case of some TCL users, the issue was caused by loose or damaged cable connections. As reported by many users, outdated TV Firmware is another cause for the case. However, sometimes the issue may be caused by hardware problems such as a defective screen or faulty LED lighting. Further, there can be some wrong internal settings leading to the issue.
I have walked you through the possible reasons why the TCL TV screen goes black but sound still works issue, and now, it’s time to look into the proven methods to fix the TCL black screen. The ways are easy to follow and implement.
Wrapping Up: TCL TV Screen Goes Black But Sound Still Works
The “TCL TV screen goes black but sound still works” issue is a prevalent problem considering many TCL users reported the issue in the recent past. I have explained the causes of the issue. Most importantly, I have explained how you can resolve and fix the issue. As you have seen in the post, the methods aren’t too complicated. You can easily follow these methods and implement them.
However, we can’t completely rule out the possibility of a hardware problem leading to this issue since it has been found true for some TCL users with the “my TCL Roku TV screen is black but has sound” issue. If the methods discussed in the post don’t fix the issue, it may mean an underlying hardware problem. We strongly recommend seeking an expert’s help to fix hardware issues and not trying to fix them alone.
Frequently Asked Questions
What causes the “TCL TV Black screen” issue?
The “TCL TV screen goes black, but sound still works” issue can have different reasons. Other TCL users have reported various reasons for the problem. Here are some of the reasons leading to the issue:
A glitch in the System
Improper power supply
Loose cable connection
Outdated TV Firmware
Incorrect TV settings
How to fix the “TCL TV Black screen” issue?
The “my TCL TV screen is black” issue has been reported by many TCL users recently. Interestingly, the issue can be resolved by implementing a few proven methods. However, these methods will only work if a hardware problem doesn’t cause the issue. Here are the proven techniques that you can implement to fix the issue:
Power cycle your TV
Plug your TV into a different power outlet
Ensure cable connections are properly configured
Tweak the Fast Start option
Ensure there is no damaged cable
Update TV Firmware
Perform a Factory Reset
What to do if the proven methods don’t fix the issue?
The proven methods will work only if any hardware problem does not cause the issue. However, sometimes the “TCL TV Black screen” issue may be caused due to hardware problems like a defective screen or faulty internal settings.
If the proven methods fail to resolve the issue for you, it may indicate an underlying hardware problem. In that case, avoiding trying things on your own and calling a TV mechanic to fix the issue is always wise. Besides, you may take your TV to the nearest service center.