How To Fix Samsung TV Won’t Turn ON?
Technical problems are common with Samsung electronics; if you are having difficulty turning ON your Samsung TV, you are not alone.
Fortunately, we are here to assist you in resolving the issue if your Samsung TV won’t turn ON.
In the following sections, we will explore some of the possible causes of Samsung TV won’t turn ON and our recommended solutions for each.
Contents
Samsung TV Won’t Turn ON: Standby Light Is ON
When your TV is plugged into an electrical outlet but turned off, you should still see a small red light or power light at the edge of the screen – usually somewhere along the bottom.
This is called the standby light. If you can see the standby or power light, that’s great!
This usually means there are no severe issues with the device, and it is working.
If your Samsung TV isn’t turning ON while the standby light is on, try to turn ON the TV using the button on the TV set and not the Samsung remote.
Your remote control has most likely run out of batteries or has an issue, which is probably why the TV isn’t turning on.
If you do this and the unit turns on, the remote control is the issue.
If you press the button and the Samsung TV won’t turn ON, there must be an issue with the TV hardware.
If this is the case, contact a technician or retailer if the TV unit is still under warranty.
Also, check if your Samsung TV is in standby mode, as you may have accidentally set the standby mode and forgotten about it.
Samsung TV Won’t Turn ON: Standby Light Is OFF
Your Samsung TV might not turn on, and the standby light is off. This is a tell-tale sign that the unit isn’t getting any power.
The first thing you’ll want to do to fix this is to check the plug.
Ensure the TV unit is securely plugged into the power source and the outlet is switched on.
If that doesn’t work, plug your TV into a different outlet.
You may also want to test the original outlet with another appliance to see if the outlet draws power (without any power outage).
Also, a few might have been using a surge protector (to prevent power surges), so make sure to check whether the surge protector is in good condition and able to avoid a power surge.
If the TV or device turns ON in another outlet, you’ll know there’s a problem with the original outlet.
However, if the original outlet works for another appliance and the TV still doesn’t turn ON in a different outlet, there might be something wrong with the TV unit.
Samsung TV Won’t Turn ON: Standby Light Is Flashing
If your TV’s standby light is flashing, the TV has detected a problem. The light will flash if there is an issue with the TV’s power source or an internal component.
If this happens, check your surge protector. These can wear out over time, so it may be time to replace them.
As per the step above, you can also try plugging the TV into a different outlet.
This will let you know if there was a problem with the power supply (power outage) through that specific outlet, indicating it is faulty.
If the Samsung TV Won’t Turn ON still after this, contact the Samsung support center for more troubleshooting help.
Samsung TV Won’t Turn ON With Alexa
Using Alexa in your smart home to turn ON and control your smart TV is convenient.
Unfortunately, it doesn’t always work well, and several reasons exist.
If the Samsung TV doesn’t turn ON, but the red light is ON, then it could be because:
- The Alexa app is outdated
- The Wifi connection between both devices is too weak
- Your TV does not have the correct smart features to work with Alexa
- Alexa in your smart home is offline
- You’re not giving a valid command to Alexa.
- Echo Mode is enabled on your Samsung TV.
Go through each item on the list above to see if any of them may be the issue that is preventing your TV or device from turning ON with Alexa.
Furthermore, try performing a power cycle on your Samsung TV. A power cycle is one of the best solutions if your smart TV encounters a glitch.
What If Your TV Isn’t Responding To Alexa Or The Remote?
If your Samsung TV Won’t Turn ON by pressing the Power button on its Samsung remote and it doesn’t respond to Alexa, try some of the troubleshooting methods mentioned earlier.
If this is the case, then it is likely that the problem you’re experiencing with your device isn’t related to Alexa connectivity.
Possible Causes For Your Samsung TV Not Turning ON
Still, your Samsung TV Won’t Turn ON? Here are some of the main things to check to troubleshoot the problem.
Power Cord
Like many Samsung electronics, your television needs a stable and continuous power supply to function using the cable box and turn it on.
So, in many cases, Samsung TV Won’t Turn ON because they have an issue with the power cord or cable. If this happens, the entire unit won’t receive power.
Also, check if the cable box is working well.
To see if this is the issue you are experiencing, try to wiggle the power cord around a little. If you see the red light flash ON now and then as you play with the cord, then this is good news.
It means that the TV is receiving power from the power source, and there likely isn’t anything wrong (like a blown a fuse) with the actual unit itself but with the power cable or power cable.
Before you go ahead and get a new power cable, try plugging your TV into a different outlet and see if you have the same issue.
You want to ensure the cord is the issue, not the outlet or the TV. Replace the power cord if it’s the issue.
Power Outlet
If your Samsung TV Won’t Turn On, or the Apple TV is not turning ON, and you can’t see any red light, it indicates that the device is not receiving any power from the power outlet.
This could be due to a problem with the power outlet where the TV is connected.
If there is no sign of power (or a blown fuse), we suggest plugging the Samsung smart TV into another power outlet to see if that works.
If you’re using an adapter, try to remove or change it too.
Remote Control
Issues with the TV remote control are one of the most common reasons for Samsung TV Won’t Turn On. This will happen if the Samsung TV isn’t turning ON, but you can see that the red light on the TV is ON.
Try to turn the Samsung smart TV screen ON using the Power button on the TV unit.
If this works, then there’s a problem with the TV remote.
Remote issues are usually related to batteries, so changing the battery might be all it takes to get your LED TV screen to work correctly again.
You can also try resetting the remote by taking out the batteries and pressing the Power button for eight seconds.
You may need to replace the remote if it still doesn’t work.
Are you struggling with Samsung TV Remote Not Working? Don’t worry; we’ve got you covered!
Interference From Other Remotes
It’s possible that your vizio TV or Samsung TV might not be turning ON because of interference with other remotes in your area.
This could interfere with the remote’s signal, causing your remote not to communicate with the TV with red standby light.
If this happens, you won’t be able to turn your Samsung Television ON with its remote control, but the red standby light should be visible.
Try to turn the TV ON with the button on the unit to see if it works.
Alternatively, make sure that you remove any other active remotes from the TV area or remove their batteries to be sure there’s no interference.
Check to see what other remote devices or wireless networks are active in the area around your TV, as this could also be causing complications.
Black Screen
Your TV screen can remain black, but the sound still works. Samsung TV’s black screen could be due to a failure in the power supply board, main board, or power board of the television.
TVs generally have more than one power supply board or main board, and fixing the power board is pretty straightforward.
A Samsung TV black screen could also occur because of backlight issues. LCD screens illuminate the TV unit using a backlight.
So, if there is a black screen, there’s a good chance the backlight isn’t working.
This Vizio TV or Samsung TV black screen could be because of a problem with the LCD TV panel or because of loose connections inside the LCD TV.
You might even have the “Sleep Timer” activated, which could cause a black screen.
To diagnose and attempt to resolve the problem, inspect all cable connections, particularly the HDMI cable, and ensure that the HDMI cable is firmly attached.
If the issue persists after checking the HDMI cable, you may need to contact the Customer Support/Samsung Support Center or a technician to repair the device.
If everything fails, you can go for a factory reset. However, it is also the best one to eliminate some issues ON Samsung television.
Note that “Reset Smart Hub” is something different from factory reset. We suggest you reset the Smart Hub when there are any app issues.
Hardware Problem
If you’ve tried all the troubleshooting methods above and checked all possible causes, then it may be the case that your LED TV is faulty and there is an issue with its hardware.
Contact Samsung Support to follow their guidance for getting your TV fixed. Samsung Care will contact you within two days once you raise a complaint.
Also read, How To Fix If Samsung TV Keeps Restarting?
Conclusion
Troubleshooting or fixing Samsung TV won’t turn ON doesn’t have to be complicated.
Check if the standby light is ON or OFF and follow the steps outlined above for each instance or check all the common causes to see if you can identify the problem.
Besides, you can contact Samsung Support if you cannot handle the issue independently, and Samsung Care is available 24/7.
