How To Fix Samsung TV Remote Not Charging?
The Samsung tribe has released a new remote for Samsung TVs called the Samsung SolarCell Remote.
It is a universal remote control that has been upgraded, and the battery may be recharged using solar panels.
The Samsung SolarCell Remote was released in 2021 and has gained much attention ever since. Unfortunately, few people are reporting the Samsung TV remote not charging.
If your Samsung TV remote not charging for any reason, then if you’re seeking ways how to charge Samsung TV remote, you’re in luck because this section will help you charge your remote.
There are four different methods to charge your Samsung Remote:
- Using a phone charger.
- Using a USB port on your TV.
- Using the USB port of a PC or laptop.
- Using solar panels present in Samsung TV Remote.
Contents
Use A Phone Charger If Samsung TV Remote Not Charging
You’ll need your phone charger adapter and a USB charging cable to charge your Samsung TV remote using a phone charger.
- Plug the adaptor into the switchboard and connect the charging cable.
- Connect the cable to the Samsung TV remote.
- Turn ON the switch, and the remote will begin charging.
This method takes about 20 minutes for a full battery charge of your Samsung TV remote. If the “Samsung TV remote not charging” issue persists, proceed with the below methods.
Use A USB Port On Your TV
To charge your Samsung TV remote using a USB port on your TV, you’ll need a USB charging cable for your phone.
- Connect the USB charging cable to the Samsung TV USB port.
- Connect the other end of the USB charging cable to the Samsung TV remote.
This method takes about 40 minutes for a full battery charge of your Samsung TV remote.
Use The USB Port Of A PC Or Laptop
You’ll need a USB charging cable for your phone to charge your Samsung TV remote using the USB port of a PC or laptop.
- Connect the USB charging cable to the USB port of a PC or laptop.
- Connect the other end of the USB charging cable to the Samsung TV remote.
This method takes 30 to 40 minutes for your Samsung TV remote to charge.
Use Solar Panels
To charge your Samsung TV remote using solar panels, ensure good sunlight outside when you want to charge the remote.
- Take the Samsung TV remote to the sunlight. Place the remote on a chair or some other thing.
- Put the remote with the buttons facing down on a sunny spot.
You can use solar panels to charge your Samsung TV remote, but a full charge takes longer than an hour. The charging time depends on the brightness of the light.
You can charge the remote while the lights are on or place it near a window to receive natural light.
After trying the above solutions, check whether the “Samsung TV remote not charging” issue is fixed.
Charging The Samsung SolarCell Remote
Samsung Neo QLED TVs typically ship with the SolarCell Remote. Charging the remote control using an external power source takes an hour.
Even though a prolonged charge time won’t significantly harm the remote control, it’s not advisable.
Additionally, you can continuously charge using solar panels. However, the complete charge will take longer.
How To See The Battery Level Of The Samsung Solarcell Remote?
Your TV receives information about the battery capacity from your Samsung SolarCell remote.
To check the battery level, follow these steps:
- Start by going to the Main screen.
- Next, select “Settings.”
- Search “General.”
- Then select “Power and Energy Saving.”
- Lastly, choose “Available Remote Battery.”
You should also be aware that as charging begins, the remote control’s front LED will turn ON and OFF once charging is finished.
Why Is The Samsung TV Remote Not Charging?
The Samsung TV remote not charging can be caused by several factors. The Samsung solar remote control could be malfunctioning.
If your battery is outdated and not functioning, consider replacing it. The Samsung remote control can replace its batteries in one of two ways: by removing the back panel or the battery cover.
If you have tried changing the battery, but it still doesn’t function, or the Samsung TV remote not charging, check to see whether the Samsung Solar Remote has any physical damage.
How Long Does The Samsung TV Remote Last?
If your Samsung remote hasn’t been damaged, it should last a long time.
Typically, Samsung remotes have a lifespan of 8 to 10 years, which is the same as the average lifespan of a Samsung Smart TV.
One remote is usually sufficient for the lifespan of the TV unless it gets lost or damaged.
Fortunately, remote damage is rare because they are typically kept in the home and not exposed to direct physical damage.
As such, the need to purchase a replacement remote is usually due to loss or damage rather than natural wear and tear.
Final Note On Samsung TV Remote Not Charging
If your Samsung TV Remote is Not Charging or is responding slowly, it may be due to a low battery.
To address this issue, Connect a USB-C cable to the remote control’s bottom connector to initiate charging.
During charging, the remote control’s front LED will turn ON, and once it’s fully charged, the LED will turn OFF.
To ensure quick recharge and optimum usage duration, it’s recommended that you avoid using the remote while charging.
For those who prefer environmentally friendly options, solar cells can charge the Smart Remote.
To do so, turn the Smart Remote over to expose the solar cell when it’s not in use and place it outdoors or in a bright area of your home.
This will increase the Smart Remote’s usable time, ensuring it’s always ready for use when needed. Please maintain the remote control when using solar power to recharge.
Frequently Asked Questions
How do I know my Samsung TV remote is charging?
To know whether your Samsung TV remote is charging, look for the front LED. When the charging begins, the front LED will turn ON; when charging is finished, it will turn off.
Is my Samsung remote dead?
To check whether your Samsung remote is dead, press and hold the power button while keeping your eyes on the screen of your mobile device. You will see a flash or light bubbling up from the remote control. If you have already replaced the remote’s batteries and still cannot see any light or moment from the remote, the remote is likely malfunctioning.
Why is my remote not working even with new batteries?
If your remote is not working even with new batteries, the battery connectors for the remote control might be unclean. Clean the connectors with a small amount of alcohol using a cotton swab or soft cloth, and then put back the batteries. If the problem persists, replace the batteries with new ones.
Why has my Samsung TV remote stopped working?
Your remote might not function due to various reasons such as physical harm, battery problems, pairing problems, or problems with the remote’s or TV’s infrared sensor. Check these issues and fix them accordingly to get your remote working again.
