How To Fix If Samsung Monitor Says Check Signal Cable?

You are not alone if you own a Samsung monitor and have experienced Samsung monitor says check signal cable. Numerous other users have also encountered this problem, and you can see it in this link. When you first see this notice, it’s simple to write it off as a component problem that can be quickly fixed by rebooting your computer or upgrading your drivers.

But let’s say you try these easy fixes, and the Samsung monitor says the check signal cable problem continues. When that happens, it’s time to consider more sophisticated methods for resolving the issues with the check signal connection on the Samsung display.

So how to fix Samsung Monitor Says Check Signal Cable? Here are some solutions to consider if you’re still having problems determining what might be wrong:

Solution 1: Clean The USB Port

Ensure that the Samsung Monitor is switched off first. Be careful to disconnect any outdoor equipment that might have impacted the signal. The signal will be impacted if the device is plugged into an HDMI port. Reconnect it after cleaning it with denatured alcohol. 

Again if your Samsung Monitor Says Check Signal Cable, see if reconnecting the external device would resolve the No Signal warning. Before this repair, ensure the USB port is clean because it may occasionally be unclean.

Solution 2: Reset Your Samsung Monitor

Disconnecting the power source is the first step in resetting your Samsung monitor. After around 10 minutes, reconnect it.

• To do this, navigate to Settings.

• Then go to the Support menu.

• After that, select Self Diagnosis.

• And then, finally, select Reset. 

The next step is to connect every HDMI device. Ensure the HDMI cable is plugged into the correct HDMI port on the Samsung monitor.

Solution 3: Check Your Video Cable And Video Ports

• Switch off your computer.

• Disconnect the video wire that links your computer to your monitor.

• Examine your computer’s and your monitor’s port connectors. (You must take your device to a service center if any connectors are bent or damaged.)

Solution 4: Fix The Loose Cables

Sometimes, ignorance or carelessness can be the root of this monitor problem. A loose display cable may cause the Samsung Monitor to say Check Signal Cable. So, check if the wire connecting the monitor to the system is loose.

Solution 5: Replace The Damaged Cables

The connection may be faulty and has to be replaced if any of its connectors are bent or damaged. Verify that all the cords attached to your computer, including the USB, sound, and network cables, are correctly seated and are not broken.

Additionally, look for physical damage to your VGA connector or the cable’s termination (For instance, if they suffered physical harm due to someone pulling them firmly).

Solution 6: Check Your Monitor Settings And The Pixel Clock

Poor visual quality and test signal cable error messages will ensure your GPU cannot keep up with that frame rate. Some pixels won’t be able to change color in time. To adjust this manually:

• Click the Start menu from your desktop.

• Go to “Run” and enter “dxdiag” inside the box. 

• Press Enter or click OK to open dxdiag (DirectX Diagnostic Tool).

• Select the Display tab on the screen.

• Then after that, go to the Monitor section. 

• Select the Advanced Properties option to open the Monitor Properties box with additional options for fine-tuning your screen resolution. (If you have Windows 7 or a later version, you should be able to see it.)

The pixel clock on Samsung displays typically adjusts automatically, but occasionally you have to modify it manually.

What Does Samsung Monitor Says Check Signal Cable Mean?

So why is the Samsung monitor saying check signal cable show? The Samsung Monitor’s “Check signal cable” message suggests that the signal cable has not been correctly connected. In that instance, there could be three issues:

• You need to insert your cable correctly.

• The HDMI port may be unclean or broken.

• The HDMI cord can be broken.

Before undertaking any fixes or troubleshooting procedures on your own, like with any computer-related issue, you should determine what is causing the Samsung monitor says check the signal cable. 

The problem is probably with your computer if your Samsung monitor displays a check signal cable. Make sure your video card, as well as other external devices, are running the most recent drivers before beginning troubleshooting.

Try a different connection to see whether it solves the problem or still exists. Trying and attaching a newly charged battery to an alternative power source doesn’t solve the issue. If so, it might be time to get a new monitor instead of your Samsung one.

Wrapping Up Samsung Monitor Says Check Signal Cable

The cable connecting your device to your Samsung monitor may not be adequately secured, be clogged, or have bugs; if you’ve had a “Samsung monitor says check signal cable” issue. It could be time to update your device’s firmware if any or all of these problems continue. Check your HDMI cable’s connection to ensure it is not the problem.

Try reconnecting and reconnecting the device if the signal is strong. The external device cable may be defective if the signal remains missing. After re-connecting the signal connection, if the “Samsung Monitor Says Check Signal Cable” persists, hardware or software issues may be to blame. 

After reattaching the connection, if your Samsung monitor says check signal cable,” your monitor’s signal cable is probably the cause. It might not be linked to the device or connected to an unclean HDMI port. Use a digital multimeter to inspect the signal cable connections if you think there is a hardware problem. 

Frequently Asked Questions 

Additional Resources

• JustAnswer.com
• Fixya