If you own an Insignia TV, you may have encountered a situation where Insignia TV Won’t Turn On But Red Light Is On.
So this post will discuss some of the possible reasons why your Insignia TV won’t turn on but has a red light on, as well as the steps you can take to troubleshoot the problem.
- Power Reset Method:
- Check Your Batteries:
- Examine The Power Outlet:
- Choose Correct Input:
- Check Your HDMI Cables:
- Factory Reset The TV:
- Reach Out To Technicians:
- Why Won’t The Insignia TV Turn On But Red Light Is On?
- Bottom Line For Insignia TV Won’t Turn On But Red Light Is On
Power Reset Method:
A power reset is a tried and tested method that can be effective in resolving issues with your Insignia TV and
It’s important to note that if you need to perform a power reset multiple times in a short period, it could be a sign of a more significant issue with your power supply.
In such cases, it’s recommended that you seek the assistance of a professional before attempting any further troubleshooting steps.
To perform a power reset method, below are the steps;
- Unplug the TV from the wall socket
- Then hold down the TV power button for about 40 to 60 seconds
- After this time, release the power button
- Plug your TV back into the wall outlet
- Now turn ON the TV
We hope this strategy works fine for you.
Check Your Batteries:
If the power reset is not your coffee, you can try this similar strategy using your remote. Here is a procedure;
- Remove the batteries from the compartment in your remote
- Hold the power button in the remote for about 40 to 60 seconds
- Then release the power button
- Place the batteries back in the remote (you can also use a pair of new batteries if necessary)
- Turn ON now
This strategy will be perfect if there are weak batteries in the remote. However, don’t get tense if none of the above two methods work for you. There are more to go! Learn How To Fix Insignia TV Remote Battery Drain?
Examine The Power Outlet:
It’s advisable first to check if the power outlet is functioning correctly by plugging in another device, such as a phone charger or a lamp, before attempting any troubleshooting methods if your Insignia TV won’t turn on but the red light is on.
This simple tip can save you time and effort. If the test device works correctly, the issue is likely with your Insignia TV.
However, if the test device doesn’t work, you should call a technician to resolve the power outlet issue.
Choose Correct Input:
If your Insignia TV doesn’t turn on, but the red light is on, it could be due to an incorrect input selection.
You must choose the appropriate input source for your TV to ensure proper functioning.
Always verify that the input source matches your HDMI port, whether you’re using a streaming device, cable box, or DVD player.
Additionally, there are two methods for selecting the correct input source: manually selecting it using the TV remote or allowing the TV to detect it automatically.
We will discuss two methods, which one will be helpful if your Insignia TV remote not working or you have lost your remote control.
Method 1 – choose the inputs using the remote
- Turn ON your Insignia TV
- Tap on the source button on the remote
- Select the desired input mode
Method 2 – change the input source without using the remote
- Turn ON your Insignia TV
- Click on the menu button (maybe on the side or bottom of the TV)
- Use the volume buttons to navigate between the source choices
- Click on the menu button to select the input source
Note that some TVs come with a source button on the back or along the sides that you can use to select the preferred input source.
Check Your HDMI Cables:
If power-related issues are ruled out, and your Insignia TV still won’t turn on, but the red light remains on, it could be due to a damaged HDMI cable.
Faulty HDMI cables can hinder signal transfer, causing confusion in your TV and leading to the Insignia TV not turning on despite the red light being on.
Therefore, inspect your HDMI cables for any damages, and if found, try re-plugging them properly or replacing them altogether to fix the issue.
If your Insignia TV Turning On And Off By Itself, Here Is How To Fix it?
Factory Reset The TV:
If you have exhausted all the above troubleshooting methods, and your Insignia TV won’t turn on, but the red light is still on, you may need a factory reset.
The factory reset process will erase all your settings on the TV, including your accounts and personal preferences, and revert it to its original settings.
To factory reset your Insignia TV, you can use the menu settings on your TV.
However, if you still encounter the issue, there is an option to press the small reset button located at the back of your TV to perform a factory reset.
Reach Out To Technicians:
Contacting the Insignia support team is a good option if you have tried all the above troubleshooting steps and your Insignia TV still won’t turn on, but the red light is on.
They will be able to provide you with more advanced solutions and technical support.
How To Turn Off The Red Light On The Insignia TV?
To turn OFF the red light on your Insignia TV, here are the steps, Assuming that you are on the home screen of your Insignia TV.
- Head towards settings
- Click on system
- Tap on power
- Choose standby LED
- Click on Turn OFF
If you are ready to learn more, consider How To Fix Insignia TV Light Blinking Red?
Why Won’t The Insignia TV Turn On But Red Light Is On?
If your Insignia TV is not turning on, but the red light is on, it could be due to power issues or technical glitches.
Having an Insignia TV at home is convenient for streaming and watching your favorite content, but the frustration of dealing with a TV that won’t turn on can be daunting.
In this guide, we have provided solutions with step-by-step instructions to help you troubleshoot the issue and get your Insignia TV up and running again.
Bottom Line For Insignia TV Won’t Turn On But Red Light Is On
We trust that you have successfully resolved the issue of your Insignia TV not turning on but displaying a red light.
However, if the problem persists, we recommend revisiting the abovementioned troubleshooting methods and giving them another try.
It is possible that you might have overlooked a crucial step, so please remain patient and persistent in your attempts to resolve the issue.
If you are eager to related posts and other issues with Insignia TV, you will get answers and solutions in our blog. So check NestHomeControl.