Hisense TV Won't Turn On

How To Fix Hisense TV Won’t Turn On?

If you are facing the issue of your Hisense TV Won’t Turn On, you’ve come to the right place.

This article will provide a list of troubleshooting checklists to help you resolve this issue and other common problems with your Hisense TV.

When I initially encountered the problem of Hisense TV Won’t Turn On, I felt uneasy and considered purchasing a new TV from a different brand.

However, after conducting extensive research online, I discovered several effective methods (which can be found here) that ultimately fixed my Hisense TV.

Therefore, let’s get started. Below are some simple and time-saving solutions you should try without skipping any steps since different solutions work for other users when fixing common Hisense TV problems.

Unplug Your Hisense Television

If you are experiencing issues with your Hisense Roku TV, such as blinking or failure to turn on, there may be configuration problems causing the issue.

In this case, a soft reset or power cycle may be the simplest and most effective fix to resolve the problem of your Hisense TV not turning on.

To perform a soft reset or power cycle, unplug your Hisense TV from the power source and wait a few minutes before plugging it back in.

This will allow the TV to reset and clear any configuration issues preventing it from turning on. After plugging the TV back in, try turning it on to see if the problem has been resolved.

Method 1

  • Unplug your Hisense Roku TV from the wall outlet. 
  • Wait for a minute 
  • Plug it back again into the power outlet.

If this easy fix is not your savior, 

Method 2 (Using TV button)

  • Remove the power cable or cord of your Hisense TV, external connections, or any other devices.
  • Please search for the Power button on the Hisense Roku TV (the power button may be at the bottom or back side of your TV)
  • Hold the Power button for about 30 to 40 seconds.
  • Wait for 20 minutes 
  • Now turn on your Hisense TV (using the TV button, indeed not your remote control)

We hope you have resolved your “Hisense TV won’t turn on” issue even on this first step. However, if not, don’t lose hope; go with the next one. 

Change Your Remote Batteries

If you have been using the batteries in your Roku remote for an extended period, they may become weak, preventing you from accessing your Android TV.

This is a common issue when your Hisense or Sony TV won’t turn on, but the standby light is on.

To resolve this issue, replace the batteries in the remote compartment with fresh ones and try turning on your Hisense TV again.

If the batteries were the cause of the problem, your TV should turn on without any further issues.

Is your Hisense TV Remote Not Working? Check out this.

Switch Outlets

If your Hisense TV is not turning on and there is a light indicator, it is possible that the device is not receiving sufficient power from the power source.

See also  Who Makes Hisense TVs And Are They Any Good?

Therefore, it is crucial to check if the power source being used for your Hisense smart TV is functioning properly.

Connect a power cord from another device, such as a table fan or strip lights, to the same power source.

If the other device works well, the issue may be with your Hisense TV rather than the power supply or source.

However, if the other device does not work, it is possible that the “Hisense TV won’t turn on” issue is due to an incorrect power supply or source.

In such a case, you can try connecting your Hisense TV to another power source to see if this resolves the issue.

Select The Correct Input For Your Hisense Television

Occasionally, you may believe that your Hisense TV won’t turn on due to a severe problem with the device.

However, the issue may be that you have selected the wrong input channel.

For instance, if you have a cable box connected to the “HDMI 2 port,” but your TV is set to display “HDMI 1,” you will not see anything on your screen.

Therefore, ensuring you have selected the correct input channel for your Hisense TV to turn on and correctly display content is essential.

To do this, you can use your TV remote to access the input menu and select the appropriate input channel, such as “HDMI 2,” where your cable box is connected.

This should allow you to view content on your Hisense TV without further issues.

Hence to fix this Hisense TV problem, 

screely 1678946204583
  • Tap on the Source or Input button on your Hisense TV remote
  • Navigate using the arrow keys and choose the correct input until you find the right input. 

Suppose your Hisense TV remote is not working; you can use the input buttons to choose the inputs. 

Inspect HDMI Port And Cable Connections On Your Hisense Smart TV

Sometimes your Hisense smart TV turns ON, but the issue lies in the HDMI ports or cables that did not transmit data. 

HDMI cables can transmit audio and video signals. So if the Hisense TV doesn’t turn on, but there are light indicators, the issue is because of the HDMI ports or cables. Now here are the steps you have to do immediately, 

  • Disconnect the HDMI cables.
  • Connect it again properly and tightly. 
  • Check if you have fixed the “Hisense TV won’t turn on” issue.

If not, 

Unplug your HDMI cable from the port and try plugging it into another port. This is one of the quickest ways, as the TVs recently have more HDMI ports. Once done, try turning ON your Hisense TV. 

Even if your Hisense smart TV doesn’t turn on, try getting another HDMI cable. Furthermore, check the other cables in your Hisense TV (like coaxial cables) if you usually use them. 

Disconnect Nearby Media Players

Sometimes, the issue with your Hisense TV not turning on or displaying a black screen may not be related to the TV itself.

Instead, it could be due to nearby devices interfering with the TV’s functionality.

For example, if you have connected streaming sticks or gaming consoles to your TV but have not used them for an extended period, they could be causing problems.

It is essential to disconnect all unnecessary external devices connected to your Hisense Roku TV to resolve this issue.

This will help to eliminate any potential interference that may be causing your TV to malfunction.

See also  How To Factory Reset Hisense TV Without Remote Picture?

Once you have disconnected these devices, try turning on your Hisense TV to see if the issue has been resolved.

How To Power-Cycle Your Hisense Remote?

The solution may seem funny, but trust me, power cycling or resetting your Hisense TV remote control helps you eliminate issues like the Hisense TV won’t turn on and Hisense TV black screen. 

For this, 

  • Take out the batteries from the remote compartment 
  • Press and hold the Power key for about 30 seconds
  • Now insert the batteries into the compartment again
  • Try using your remote control to turn on the Hisense Roku TV.

Disable The Standby Mode On Hisense TV

Specific Hisense Smart TV models have a standby mode that can cause the “Hisense TV won’t turn on” issue. This problem is particularly prevalent in older versions of Hisense TV models.

If your Hisense TV is stuck in standby mode and you cannot get it to turn on, you may need to disable the standby mode.

This can usually be done through the TV’s settings menu or by pressing a specific button on the remote control.

If disabling the standby mode does not resolve the issue, you can try doing a hard reset, which can help to fix the problem quickly. Instructions on performing a hard reset will be discussed later in this article.

Inspect Your Backlights In The TV

If your Hisense TV is not turning on, one possible cause could be a failure in the LED backlight. The LED backlight brightens the pixels from the back, enhancing the overall quality and sharpness of the picture.

If the backlights are damaged, you may see the screen, but you won’t be able to view images or videos.

Backlight failures can be caused by a short circuit in the main board, fluctuations in the power supply, or a failure in the power board.

If you can hear sound in the background, but your Hisense TV won’t turn on, or the red light on your Hisense TV blinks three times, this may indicate a backlight failure.

In such cases, it is recommended that you inspect the backlights in your TV and seek professional help if required to repair or replace them.

How to check if your backlight is damaged or faulty?

  • Turn on the torch light or get the flashlight on your mobile phone. 
  • Point it close and directly toward your Roku TV screen. 
  • Check whether you can see faint images or videos on the screen.
  • If you could note anything like dim images, then you can be sure that there is a problem with the backlights, which makes your Hisense TV won’t turn on.

Now the only thing you can do is to get a replacement from Hisense TV manufacturer or a nearby TV repair shop. 

Diagnose A Hardware Issue On Your Hisense TV

If you have exhausted all other troubleshooting methods and your Hisense TV still won’t turn on, the issue may be a hardware problem, such as a damaged or faulty motherboard or power supply board.

To determine if the motherboard is defective, you can use a multimeter. However, suppose you are uncomfortable opening your TV’s back panel.

In that case, we recommend that you seek the assistance of a professional TV mechanic to diagnose and repair the hardware issue.

Attempting to fix a hardware issue without proper knowledge or training can be dangerous and may cause further damage to your Hisense TV.

Therefore, seeking professional help is essential if you suspect your TV has a hardware problem.

See also  How To Do Hisense TV Factory Reset With Remote?

However, if you are interested in opening the back panel of your Hisense TV, below are the set of steps; 

  • Remove all the screws and open the back panel of your device
  • Search for the motherboard/power supply board (usually green in color and can be seen on the left-hand side)
  • Also, check your Hisense TV manual
  • With the help of the multimeter test, every voltage source
  • If you detect any dead voltage source, it indicates that the power supply board is faulty. 

Restore Factory Settings

If you have exhausted all other troubleshooting methods and your Hisense TV still won’t turn on, a factory reset may be necessary.

This process involves wiping out all the data installed and stored on your Roku TV and restoring it to its original settings.

Performing a factory reset on your Hisense TV may help resolve any software-related issues preventing it from turning on.

However, it is essential to note that a factory reset will erase all data, including installed apps, saved settings, and preferences, so you should only perform this as a last resort.

To perform a factory reset on your Hisense TV, you can access the reset option through the TV’s settings menu or use a specific button combination on the remote control.

Instructions on factory reset are usually found in the TV’s user manual or the manufacturer’s website.

Here are the instructions for hard resetting your Hisense LCD TV, 

  • Check for a ” RESET ” button at the back side of your Hisense TV.
  • Insert a pin or paper clip inside the hole 
  • Now press the brooch or pin and hold the button for about 15 seconds. 
  • Do it until you can see the Hisense LCD TV restarting 


  • Go to Settings on your Hisense TV.
screely 1678946002727
  • Tap on Device Preferences
device preferences ON HISENSE TV 4
How To Fix Hisense TV Won't Turn On? 7
  • Navigate to Reset.
reset on Hisense TV 3
How To Fix Hisense TV Won't Turn On? 8
  • Tap on Erase Everything
Erase everything on Hisense TV 1
How To Fix Hisense TV Won't Turn On? 9

Does Your Hisense TV Have Warranty Coverage?

If you have tried all the troubleshooting steps mentioned above and your Hisense TV still won’t turn on, it is essential to check if your TV is under warranty coverage.

You can contact Hisense customer support for assistance. When contacting the manufacturer, you have your Hisense TV model number, remote serial number, and purchase date ready.

You can reach Hisense customer support through chat or phone, and their hours of operation are typically from 8:30 am to 7:30 pm, Monday to Friday.

They may be able to offer additional troubleshooting steps or arrange for a repair or replacement if your Hisense TV is still under warranty.

Summing Up, Hisense TV Won’t Turn On

In summary, several possible solutions exist if your Hisense TV won’t turn on. First, try unplugging your TV and waiting a few minutes before plugging it back in. You can also check if the remote batteries need to be replaced or try using a different power source.

If your TV is stuck in standby mode, disabling the way or performing a hard reset may help resolve the issue. Additionally, inspecting the backlights of your TV or diagnosing a potential hardware issue may be necessary.

Finally, if none of the above steps work, it may be time to contact Hisense customer support to see if your TV is still under warranty coverage. By trying these solutions one by one with care, you may be able to get your Hisense TV up and running again within a few minutes.

Additional Resources

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *