Hisense, although known for its budget-friendly TV models in the market, few users are facing some hiccups today. Yes, some people have experienced the Hisense TV red light blinks 3 times while watching and don’t know what to do.
We guess that you are also facing the same issue and are searching for how to fix this Hisense TV red light blinks 3 times issue. Then, congratulations first. You have landed at the right place.
This blog post will answer all your doubts, and here we will help you fix this Hisense TV red light blinks 3 times issue in detail. What are you waiting for? Let us get started.
- Restart The TV
- Try Replacing Your LED Lights.
- Examine Your Surge Protector
- Check Your Hardware.
- Opt For A Soft Reset
- Updating Your Firmware
- Try Factory Resetting
- Contact The Hisense Support Team
- Visit Repair Shops
- Why My Hisense TV Is Flashing Red Light?
- Wrapping Up Hisense TV Red Light Blinks 3 Times
Restart The TV
A simple restart can fix the error if temporary software bugs make your Hisense TV red light blinks 3 times. So, go through the steps below to perform a quick reboot.
- Press the power button until you see the Hisense TV turning OFF
- Disconnect the TV from the power source
- Wait for 60 seconds
- Then plug the TV back into the power source
If restarting does not resolve your Hisense TV red light blinks 3 times issue, don’t worry. Proceed to the next step.
Try Replacing Your LED Lights.
Although this is rare, replacing the LED panel and removing the old ones will help eliminate the issue. This is because the light array might be failed or break over time.
Examine Your Surge Protector
Try checking with your power outlets and surge protectors for damages and replace them as they are affordable. Moreover, we know that replacing or repairing circuit boards is expensive. Follow the procedure;
- Disconnect your Hisense TV from the current power outlet
- Connect it to a different power source
- If your issue is not resolved now, it is time to buy a new surge protector or otherwise get help from an electrician to fix the power outlet (which you used first)
Check Your Hardware.
There is no doubt that the components in the Hisense TV are of high quality and strong. But internal parts can sometimes get damaged because of short circuits or irregular power supply.
Another probability is that even if your Hisense TV red light blinks 3 times and the Hisense TV won’t turn ON, the motherboard may be damaged or burnt out. Hence if there are internal breakages, you must take your TV to the repair center.
Opt For A Soft Reset
How To Soft Reset Your Hisense TV?
- Remove all the devices you have connected to your Hisense TV
- disconnect the TV from the power supply
- Press the power button for 30 to 35 seconds
- Wait for 15 minutes
- Now connect your TV to the power source
- Switch ON your Hisense TV and check your Hisense TV red light blinks 3 times has been resolved.
Updating Your Firmware
We always advise you to check for updates often. There are chances that the outdated firmware causes severe problems to your Hisense TV (irrespective of the brand). For this,
How To Update Your Hisense TV Firmware?
- Urge towards the settings menu in the Hisense TV
- Click on about or support (whatever you see)
- Select system update
- Tap on check firmware upgrade
- Choose the option “upgrade.”
Try Factory Resetting
Factory reset is the most effective option to remove all configuration errors. The factory reset method varies and depends on the Hisense TV models. If you are not done with any of the above fixes, your final option is a factory reset. Therefore once go through the manual for more information and the model year.
How To Factory Reset Your Hisense TV?
If you bought your Hisense TV in 2014 or after, these are the following instructions.
- Press the menu on your Hisense TV remote
- Choose support
- Click on enter or OK or select (whatever you see)
- Now choose self-diagnosis and click on enter.
- Tap on reset
- You will be prompted to confirm by entering the PIN.
- (if you have not set your PIN, the default PIN is 0000)
Suppose your Hisense TV is before 2014
- On your remote, press the EXIT button
- Wait for 20 seconds
- Now you will see the factory service settings
- Click on the OK button
- Turn OFF your Hisense TV
Suppose your Hisense TV Your Device Has Failed Verification System Halted; here are the solutions for the problem.
Contact The Hisense Support Team
One such personal suggestion is to check whether the LED lights have a warranty. If it is, then check for the parts covered under warranty.
Check the warranty card and contact the service provider or Hisense support service if you find a warranty period left over. This is highly beneficial and eliminates the need for a private repair center. Finally, the Hisense technicians will help you resolve the Hisense Roku TV red light blinks 3 times problem.
Visit Repair Shops
Unfortunately, it is time to visit the nearest repair center if your warranty period is over. Show your Hisense TV to the technician, and he might be able to resolve the Hisense TV red light blinks 5 times problem.
Why My Hisense TV Is Flashing Red Light?
You have to know why is my Hisense TV is flashing red light first so you can fix your Hisense TV red light blinks 3 times issue.
Here you have some serious causes as well as some usual causes. So, determine which is the cause of your problem. We repeat this because you can’t do anything without knowing why is my Hisense TV is flashing red light.
Reason 1 – Inappropriate Mode
Differently, your Hisense TV might be stuck on standby mode, which happens randomly while watching a web series or TV show. In this situation, you may see the Hisense TV red light blinks 2 times while on. However, the TV never responds to your remote control or button functions.
Reason 2 – Faults In LED Lights
Here is a rare cause, but it may be suited for you. Your Hisense TV may work well, but at the same time, you will experience Hisense TV’s red light blinking 2 times while ON. This may be because of any problems with the LED lights or panel. The fixes for this issue are simple but require technical knowledge.
Reason 3 – Internal Damages
Now, this is something more severe than the above one. Your Hisense TV red light blinks 2 times while on because of some internal problems. Maybe because of a faulty capacitor or damaged or burnt-out components that cause the power board to malfunction.
Alternatively, the capacitors may be burnt out, but whatever the issue, you need expert advice for fixing this “Hisense TV red light blinks 2 times while on”.
Reason 4 – Power Supply
An electric shock from a strong storm may cause your Hisense Roku TV red light blinks 3 times, or Hisense TV red light blinks 5 times. This is because the signals travel into the circuit board, and as a result, they will be broken. Also, getting so much electricity from the service provider results in the same.
Hence insufficient power supply can worsen the condition of your Hisense TV if you are not using a surge protector.
Reason 5 – External Device Issues
Sometimes the gaming console or other external devices can stop your TV from turning ON through an HDMI. If you shut down the console directly without changing the HDMI source, you will experience the Hisense Roku TV red light blinking 3 times.
The Hisense TV red light blinks 3 times, or Hisense TV red light blinks 5 times issue is common, which can be resolved very quickly. We hope you can determine your problem even at the first step, but if not, don’t lose hope, and be sure to try all our fixes.
And the good news here is that you are not required to spend any money on the above solutions.
Frequently Asked Questions
How do I reset my Hisense TV with a black screen?
Here is a quick guide on Hisense TV with a black screen or black screen of death. Unplug your Hisense TV from the power supply, and wait for 2 to 4 minutes. Press & hold the power button on your TV for about 30 seconds. Then connect your TV to the power supply after a minute. Turn ON your Hisense TV now, and it should usually work.
Why is the red light blinking on my Hisense TV?
Some of the most common reasons for the red light blinking on my Hisense TV are insufficient or improper power supply, faults in the source, issues in the HDMI ports or connections, problems in the backlights, software errors, power board failure, and so on.
What to do when your Hisense TV red light blinks 8 times?
If your Hisense TV red light blinks 8 times, check if there are any faults in the power supply board, check your internet connection, check for any damages in the capacitors, check your cable connections, check if there are any problems with the backlights, and if nothing helps you, get help from the Hisense support center.