There’s no need to fret if you’re concerned about the Apple TV Remote Volume Not Working. We’re here to offer assistance.
Despite its recent success, some Apple TV users have reported issues with their remote, including difficulties with volume control.
One such issue is unresponsive buttons that fail to register no matter how many times you press them. Fortunately, we’ve identified several potential causes and solutions for this volume button malfunction on the Apple TV remote.
Take your time reading through this post to learn how to restore your Apple TV Remote Volume that is Not Working.
In general, Apple TV comes with an Apple TV remote, a Siri remote, or an Apple remote. So if your Apple TV remote volume is not working, follow these steps individually.
Charge Your Battery
Charging the remote for 30 minutes is essential if you use a Siri or Apple TV remote. You can use a USB wall charger or a USB cable for charging.
In case you are using an Apple remote, replace your batteries first.
How To Check Your Battery Level On The Apple TV Remote?
- Launch the settings option on your Apple TV
- Tap on the option remotes and devices
- Then under the remote section, you can see the battery level
- Finally, click on remote to see the exact level of your battery (in percentage)
Stay Within The Range
It’s essential to keep in mind that when using your Apple TV remote, you should hold it closer to your device.
Unlike typical remotes, the Apple TV remote is a smart device that prioritizes voice control over traditional buttons.
As a result, it’s crucial to remember that the connection between the Siri remote and your Apple TV relies solely on Bluetooth.
To ensure that your Siri remote works properly, it’s best to stay within the range of your Apple TV and utilize Siri to adjust your volume level.
Additionally, removing any objects that could potentially obstruct the transmission between your Siri remote and your Apple TV is recommended.
This will enable your remote to communicate with the IR sensor on your Apple TV directly.
Program Your Remote
Here are the simple instructions on how to manually program your Siri or Apple TV remote
- Navigate to settings on your remote
- Choose remote and devices
- Select volume control
- Choose the option “learn new device.”
- Finally, follow the instructions on your TV screen to control the volume.
Reset Your Remote
If you’re experiencing Apple TV Remote Volume Not Working, resetting it can often be the easiest and most effective solution.
If you encounter problems with the volume button on your Apple TV remote, you can try unpairing and resetting your remote to see if it resolves the issue.
Below Is A Quick And Easy Guide For You.
- Unplug your Apple TV from the power source
- Wait for 10 to 20 seconds
- Plug your Apple TV back into the power source
- Wait until you see the home screen of your TV
- Once you see, try using your remote.
We hope the remote works for you now; if not, try the below solutions.
Here are the steps for resetting the Apple TV remote.
For Apple TV And Siri Remotes
- Press & hold the control center/TV and volume down buttons simultaneously. Do this until you see the light on your Apple TV turn off and ON again.
- Now release the buttons.
- Wait for 5 to 10 seconds.
- You will see a notification on your TV screen for a connection loss.
- Restart your remote
- Now a notification for a successful connection will appear on your TV screen.
Alternatively, you can reset your Apple TV remote by pressing and holding the menu or back and volume up button for 5 seconds. Afterward, place your remote on top or nearer to the Apple TV for pairing.
For Apple Remotes
- Hold down your left arrow and menu button on the remote for atleast 6 seconds.
- Select the unlink icon on your Apple TV
- Follow the above steps again to pair your Apple TV to the Apple remote.
Check The Settings On HDMI-CEC
Usually, the name of the HDMI-CEC ends with a sync or a link.
- Make sure that your Apple TV provides HDMI-CEC support
- If so, check whether HDMI-CEC is turned ON or OFF
Clean Your Remote
It’s essential to clean your remote periodically, especially if you misplace it often.
Moreover, it’s crucial to check whether your Apple TV remote and its receiver contain dust or dirt, mainly if you haven’t used them in a while.
As the Apple TV remote uses IR sensors to adjust the volume, it’s crucial to ensure that the receiver and remote are completely clean.
If you find any dust or dirt on your Apple TV remote and receiver, it’s recommended to clean them regularly with a soft cloth to ensure they function correctly.
Make Use Of The Remote App
If you are having issues like Apple TV Remote Volume Not Working, you can use your iPhone as a replacement remote while using Apple devices.
You can download and install the free remote app to use your iPhone as an Apple TV remote.
Once installed, click on the “Add Apple TV” option to pair your application with your Apple TV.
If you connect your Apple devices to the same wireless network, you can use your iPhone, iPod touch, or iPad to control your TV.
How To Change The Volume Using The Apple Remote App?
- Urge towards the option settings
- Click on remotes and devices.
- Then in control TVs and receivers – choose whether the Apple TV remote or Siri remote turns On your TV or receiver.
- Volume control – choose whether an Apple TV remote or Siri remote controls the volume of your TV or receiver.
You can find the Apple TV remote controls in the control center of your iPhone or iPad if you are using iOS 12 or the later versions.
- Now open your control center.
- Click on the Apple TV remote.
- Choose Apple TV or smart TV from your list.
- Then follow the instructions appearing on the screen.
- Enter the four-digit password or code in your iPad or iPhone
- Finally, the volume options on your Apple device (iPad or iPhone) work as your volume buttons for the Apple TV.
- You can now press the volume button to increase or decrease the volume.
Furthermore, if you are interested, you can learn
Why Is My Apple TV Remote Volume Not Working?
The Apple TV Remote Volume Not Working issue can be frustrating, especially when selecting a movie or changing a volume.
Understanding why your Apple TV remote volume isn’t working is crucial so you can address the issue.
It’s essential to determine whether there’s an alternative to using your remote if the Apple TV Remote Volume is Not Working.
We see the Apple TV controls are white or aluminum colored and are powered by a CR 2032 cell. So the main reason could be because of the cell running out.
Hence, you have to change the cell; if it does not work, you can go through the abovementioned solutions.
Talking about the latest generation of Apple remotes, the Apple TV remote volume button is not working, probably because of an empty charge.
But generally, the charge in the remote lasts even for years if you have charged once and depending on the usage.
On the other hand, any electronic items need to be charged regularly or once the charge is out.
So try using the remote once you put charge fully, and still, the Apple TV 4k remote volume not working issue persists; leave this reason.
The remote control may be out of range, so move you’re remote closer to the Apple TV. It is advisable to have your remote control within 10 meters of Apple TV for effective working.
Similarly, you will have your Apple TV 4k remote volume not working if it is not paired correctly with your Apple TV, have a look at it.
There may be a weak WiFi signal in your residential area.
Apart from these, there are also probabilities, like the controller is unlinked to the receiver. So follow the above solutions, and Apple recommends doing these.
Final Note On Apple TV Remote Volume Not Working
If the volume button isn’t working on your Apple TV remote, accessing apps or playing shows on your Apple TV can be a challenge.
However, we hope this article has provided enough knowledge to resolve the issue.
If you’ve tried everything and still find that your volume button isn’t working on your Apple TV remote, purchase a new remote online or contact the Apple support team for further assistance.
Frequently Asked Questions
How to pair Apple TV remote?
Note that this method works well for the latest Apple TV models from 2015.
Press any key on your Apple TV remote until you see a notification that the remote has been noticed. Bring the Apple TV remote closer to the TV. Keep holding the remote key you are pressing. After a few seconds, you will be notified that the pairing is successful on your Apple TV.
How to reset Apple TV remote?
One of the simplest ways to reset the Apple TV remote is knowing How to reset Apple TV remote manually. Hold down the menu and volume up buttons on your Apple TV remote. Then, you will get a flashing command on the TV screen stating that it is pairing the remote. Then hold the remote closer to the Apple TV until the pop-up menu (pairing remote notification) disappears. Once the pop-up disappears, try using the remote.
How to connect Apple TV to WiFi without a remote?
To connect Apple TV to WiFi without a remote, you only need an iPhone, iPad, or iPod if you have lost or do not have the remote right now.
Open the control center in your iPhone, search for Apple TV remote control
If you did not find it, go to settings and choose “control center.” Click the + icon next to the Apple TV remote (in the control menu).
By doing so, you are adding an Apple TV remote to the control center. Then swipe up and open the control center. Here click on the remote icon. With the help of the Apple TV remote app on your iPhone or iPad, navigate to settings and network and then choose WiFi on your Apple TV. Then select your network and enter the password to connect to the WiFi.